Sovol Tri-Color PLA Filament 1kg & Sovol SV07 Plus 3D Printer

The Sovol Tri-Color Rose Blue Yellow Silk PLA Filament 1kg and the Sovol SV07 Plus 3D Printer are a powerful combination. The SV07 Plus boasts a Max Print Speed of 500mm/s, enabled by the Klipper firmware, which allows the printer to reach exceptional speeds.

The printer is equipped with a high-resolution 5-inch touch screen, providing a vastly different experience from the traditional knob screen and 4.3-inch touch screens found in the market. Klipper also offers a range of advanced functions, including the height map and input shaper, allowing users to customize the printer to their specific needs.

The SV07 Plus features an all-metal hotend with a larger melt zone, capable of achieving temperatures up to 300°C and offering high flow rates of up to 20-30mm³/s. This design significantly reduces the risk of clogging and allows for the printing of a wide range of materials, such as ABS and Nylon, without the need for PTFE replacements or firmware flashes.

The printer's impressive 600W Meanwell Power supply and 420W heated bed enable rapid heating, allowing the bed to reach 60°C in just 90 seconds, which is 30 seconds faster than most printers on the market. This, combined with the larger 300x300x350mm print volume, provides users with a highly efficient and versatile printing experience.

The Sovol SV07 Plus also boasts a Planetary Dual Gear Direct Drive Extruder, which offers a higher drive ratio and a lighter motor for precise extrusion. Additionally, the inclusion of a large external knob makes feeding easier, allowing users to focus on their printing projects with minimal interruptions.

One of the standout features of the SV07 Plus is its 25-point bed leveling system, which utilizes an inductive sensor to detect and compensate for any unevenness in the heated bed. This precise and smart technology ensures a fantastic first layer, and users are advised to set the initial layer height to 0.3mm when slicing for optimal results. If any adhesion issues arise, it is recommended to wipe the PEI surface with alcohol before the next printing session.

In summary, the Sovol Tri-Color Rose Blue Yellow Silk PLA Filament 1kg and the Sovol SV07 Plus 3D Printer offer a powerful and versatile printing experience, with advanced features and technologies that cater to the needs of both novice and experienced users.

product information: